×
TeamSpeak obligatoire quand on roule sur nos serveurs (12 Sep 2016)

Merci d'être connecté sur notre TeamSpeak quand vous roulez sur nos serveurs. Toutes les informations sur TS

file COM_KUNENA_LABELS_DISCUSSION TUTO - Réglage du FFB pour rF2

More
11 Nov 2017 12:21 - 18 Nov 2017 00:22 #11238 by MaD_King
MaD_King replied the topic: TUTO - Réglage du FFB pour rF2
Mes réglages T300 RS (basés sur le profil par défaut rF2) :

Driver T300 RS avec rotation fixe à 360° :


Driver T300 RS Forces :


Paramétrage en jeu de mon controleur :


Je mets 0.75 de FFB Mult (comme indiqué sur la capture d'écran avec la GT500 car je suis en 360° et que je suis à 100% dans le Driver Windows).
Si vous avez trop de vibration, mettez le smoothing à 1 au lieu de 0


Extrait de mon Bloc FFB de mon controler.json, qui est en fait le contrôleur par défaut de rF2 (Detect dans le jeu)
"Force Feedback":{
    "Brake effects on steer axis":1,
    "Brake effects on steer axis#":"0 = Brake effects on brake axis, 1 = brake effects on steering axis.",
    "Brake effects strength":10000,
    "Brake effects strength#":"-10000 to +10000, applies to all brake effects (force, vibration, static spring, etc?)",
    "Brake spring coefficient":1,
    "Brake spring coefficient#":"Static spring effect rate (-1.0 to 1.0)",
    "Brake spring saturation":1,
    "Brake spring saturation#":"Static spring effect peak force (0.0 to 1.0)",
    "Clutch effects on steer axis":0,
    "Clutch effects on steer axis#":"0 = Clutch effects on clutch axis, 1 = brake effects on steering axis.",
    "Clutch effects strength":10000,
    "Clutch effects strength#":"-10000 to +10000, applies to all clutch effects (force, vibration, static spring, etc?)",
    "Clutch spring coefficient":0.2,
    "Clutch spring coefficient#":"Static spring effect rate (-1.0 to 1.0)",
    "Clutch spring saturation":1,
    "Clutch spring saturation#":"Static spring effect peak force (0.0 to 1.0)",
    "G920_workaround":true,
    "G920_workaround#":"Workaround for Logitech G920 firmware bugs ... may need to turn this off after firmware update if it gets fixed.",
    "Gearbox effects on steer axis":0,
    "Gearbox effects on steer axis#":"0 = Gearbox effects on gearbox 'axis', 1 = brake effects on steering axis.",
    "Gearbox effects strength":10000,
    "Gearbox effects strength#":"-10000 to +10000, applies to all gearbox effects (force, vibration, static spring, etc?)",
    "Gearbox spring coefficient":0,
    "Gearbox spring coefficient#":"Static spring effect rate (-1.0 to 1.0)",
    "Gearbox spring saturation":1,
    "Gearbox spring saturation#":"Static spring effect peak force (0.0 to 1.0)",
    "Ignore controllers":0,
    "Ignore controllers#":"Do not use FFB on: 1=controller1, 2=controller2, 4=controller3, 8=controller4, 16=controller5, 32=controller6 (or add values to ignore multiple controllers, for example 63 ignores all)",
    "Jolt magnitude":1.5,
    "Jolt magnitude#":"How strong jolts from other cars (or walls) are.  Suggested Range: -2.0 to 2.0.",
    "Off-road multiplier":0.3,
    "Off-road multiplier#":"Temporary test variable to reduce force feedback strength off-road (0.0 = zero FFB, 1.0 = full FFB)",
    "Other spring coefficient":0.2,
    "Other spring coefficient#":"Static spring effect rate (-1.0 to 1.0) for any other FFB-capable controllers",
    "Other spring saturation":1,
    "Other spring saturation#":"Static spring effect peak force (0.0 to 1.0) for any other FFB-capable controllers",
    "Rumble strip magnitude":0,
    "Rumble strip magnitude#":"How strong the canned rumble strip rumble is.  Range 0.0 to 1.0, 0.0 disables effect.",
    "Rumble strip pull factor":1.5,
    "Rumble strip pull factor#":"How strongly wheel pulls right\/left when running over a rumble strip. Suggested range: -1.5 to 1.5.",
    "Rumble strip update thresh":0.05,
    "Rumble strip update thresh#":"Amount of change required to update rumble strip effect (0.0 - 1.0)",
    "Rumble strip wave type":0,
    "Rumble strip wave type#":"Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.",
    "Steering effects strength":-10000,
    "Steering effects strength#":"-10000 to +10000, applies to all steering effects (torque, resistance, static spring, jolt, etc.)",
    "Steering resistance coefficient":0.1,
    "Steering resistance coefficient#":"Coefficient to use for steering resistance.  Range: -1.0 to 1.0",
    "Steering resistance saturation":0.1,
    "Steering resistance saturation#":"Saturation value to use for steering resistance.  Range: 0 - 1.0",
    "Steering resistance type":0,
    "Steering resistance type#":"0=use damping, 1=use friction",
    "Steering spring coefficient":0,
    "Steering spring coefficient#":"Static spring effect rate (-1.0 to 1.0)",
    "Steering spring saturation":0.1,
    "Steering spring saturation#":"Static spring effect peak force (0.0 to 1.0)",
    "Steering torque capability":2.5,
    "Steering torque capability#":"The maximum torque capability of the wheel (in Nm, obviously)",
    "Steering torque extrap blend":0,
    "Steering torque extrap blend#":"Higher blends of extrapolated value allows driver to feel torque changes even when actual torque exceeds 'input max' (0.0=disables, 1.0=max)",
    "Steering torque extrap time":0.015,
    "Steering torque extrap time#":"Time in seconds to extrapolate steering torque based on current change (Range: 0.001 to 0.050.  To disable, set 'blend' to 0.0)",
    "Steering torque filter":0,
    "Steering torque filter#":"Number of old samples to use to filter torque from vehicle's steering column (0-32, note that higher values increase effective latency)",
    "Steering torque minimum":0,
    "Steering torque minimum#":"Minimum torque to apply in either direction to overcome steering wheel's 'FFB deadzone' caused by friction",
    "Steering torque per-vehicle mult":0.75,
    "Steering torque per-vehicle mult#":"Per-vehicle steering column torque multiplier (this is a copy of the .CCH value)",
    "Steering torque sensitivity":1,
    "Steering torque sensitivity#":"Sensitivity curve applied to representable torques: 0.0=low 1.0=linear 2.0=high",
    "Steering torque zero-speed mult":0.3,
    "Steering torque zero-speed mult#":"Multiplier at zero speed to reduce unwanted oscillation from strong static aligning torque",
    "Test_workaround":true,
    "Test_workaround#":"Workaround for apparent driver CTD on release",
    "Throttle effects on steer axis":0,
    "Throttle effects on steer axis#":"0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.",
    "Throttle effects strength":10000,
    "Throttle effects strength#":"-10000 to +10000, applies to all throttle effects (force, vibration, static spring, etc?)",
    "Throttle spring coefficient":0.1,
    "Throttle spring coefficient#":"Static spring effect rate (-1.0 to 1.0)",
    "Throttle spring saturation":1,
    "Throttle spring saturation#":"Static spring effect peak force (0.0 to 1.0)",
    "Type":1,
    "Type#":"Type of force feedback: 0=off 1=wheel 2=joystick 3=rumble\/gamepad 4=custom",
    "Use thread":false,
    "Use thread#":"Use a separate thread to issue FFB commands which may block with some drivers"
  },

Core i5 2500, 12Go de RAM, LCD 24" Asus VG248QE, nVidia 970 4Go, Pédalier VPP 3 pédales, Shifter ActLabs, Volant T300 RS et Windows Seven 64bits
Attachments:
Last Edit: 18 Nov 2017 00:22 by MaD_King.
The following user(s) said Thank You: PatriSte

Please Log in or Create an account to join the conversation.

More
11 Nov 2017 12:32 #11240 by [31R] Dom
[31R] Dom replied the topic: TUTO - Réglage du FFB pour rF2
Merci beaucoup Mad ;)

Please Log in or Create an account to join the conversation.

  • Not Allowed: to create new topic.
  • Not Allowed: to reply.
  • Not Allowed: to add attachements.
  • Not Allowed: to edit your message.
Time to create page: 1.177 seconds
Powered by Kunena Forum
Logo Paddocktv
Logo Enduracers
Logo Rf2
FAIRE UN DON
 

Choose Language